Also known as Beam Splitter
Functions: Beamsplitters (slices) allow the laser/image/light source to be split into two, 50% penetration, 50% reflection, multi-layer film evaporation, non-metallic film, so the absorption rate is extremely low.
Applications: Laser/Optical/Images equipments, AOI.
Spectral Characteristics
Tave=50 +/-5% @ 420-700nm aoi=45°
Physical Characteristics
Glass: 1.1, 3.0mm
Square: 8x8 - 220x220mm
Round: Dia8 - 210mm
Resistant Temperature
Glass:150℃
Spectral Characteristics
Tave=50 +/-5% @ 420-700nm aoi=45°
Side2: AR Coating @ 420-680nm
Physical Characteristics
Glass: 1.1, 3.0mm
Square: 8x8 - 220x220mm
Round: Dia8 - 210mm
Resistant Temperature
Glass:150℃
Spectral Characteristics
Tave=70 +/-5% @ 420-700nm aoi=45°
Physical Characteristics
Glass: 1.1, 3.0mm
Square: 8x8 - 220x220mm
Round: Dia8 - 210mm
Resistant Temperature
Glass:150℃
Spectral Characteristics
Tave=80 +/-5% @ 340-380nm aoi=45°
Physical Characteristics
B270: 1.1mm
Square: 8x8 - 220x220mm
Round: Dia8 - 210mm
Resistant Temperature
B270:150℃
Spectral Characteristics
Tave=80 +/-5% @ 340-380nm aoi=45°
Physical Characteristics
B270: 1.1mm
Square: 8x8 - 220x220mm
Round: Dia8 - 210mm
Resistant Temperature
B270:150℃
1. Beamsplitters are vacuum vapor deposited on a multilayer dielectric film. There is no problem with the absorption of metal film. The ratio of penetration to reflection is close to 100%. Design and production can be changed according to customer needs.
2. Coating by PVD-EBGE (Physical Vapor Deposition-Electron Beam Gun Evaporation)。
3. The transmittance curves are measured from 45° of incidence angle. Each transmittance is at the average value of visible light.
4. The spectral curve is the actual measured value of the sample and may vary slightly, depending on the manufacturing batch, but it can conform to the spectral definition.
5. The website specifications are for reference only, and the shipments are subjected to the specifications confirmed by both parties.
6. Browse below for more information and products,
*Density filters