HOME > For Lighting

  • Dichroic filters
  • Dichroic Mirrors
  • Dichroic gobos
  • Glass gobos
  • Metal gobos
  • Aluminum Mirrors
  • Heat reflection filters
  • UV-cut filters
  • Color temperature conversion filters
  • RGB/CMY mix filters
  • Fiber lighting color wheel
  • Diffuser/Frost
  • Textured/Solar glass
  • Plastic lenses
  • Glass lenses
  • Aquarium lighting filters
  • Meat/Sea lighting filters
  • Vegetable/Fruit/Flower lighting filters
  • Plants grow lighting filters
  • Anti-insect lighting filters
  • Yellow uv-cut filters
  • Surface detection lighting filters
  • UV leak detect filters


  • HOME > For Lighting >
    Heat reflection filters

    Heat reflection filters, 岳華展光電

    Heat reflection filters

    Also known as: Heat Mirror, Hot Mirrors, DN Filters, Day and Night Filters

            

    Functions: Heat reflection filters can reflect the ultraviolet and infrared rays of the light source while the visible light is high, and can reduce the temperature in the light source. Widely used in stage effects, building flooding, commercial space lighting, floodlights, moving lights, scanning lights, effect lights, wall washers, fiber optic lights or optical medical instruments, long-term use, high temperature resistance No release film.

            

    Applications: Lighting, Stage Lights, Fiber Optic Lights, Optical Instruments.



    IRCUT710    ▽UVIRCUT+AR-385/725   ▽UVIRCUT+AR-400/730 
    Information and Notes
      IR-cut filters,rocoes

    ITEM NO: IRCUT710

    Spectral Characteristics

    T50%=710 +/-15nm

    Tave>88% @ 430-660nm

    Tave<3% @ 780-1050nm

    Physical Characteristics

    Borosilicate: 1.1, 2.0, 3.0mm

    Glass: 1.1mm

    Tmpered glass: 2.0, 3.0mm

    Square: 3*3 - 310*320mm

    Round: Dia3 - 300mm

    Resistant Temperature

    Glass:150℃

    Tempered glass:250℃

    Borosilicate:450℃

      UV/IR-cut filters,rocoes

    ITEM NO: UVIRCUT+AR-385/725

    Spectral Characteristics

    Tave<1% @ 200-370nm

    Tave>95% @ 430-680nm

    Tave<3% @ 800-1000nm

    Physical Characteristics

    Borosilicate: 1.1, 2.0, 3.0mm

    Glass: 1.1mm

    Square: 3*3 - 310*320mm

    Round: Dia3 - 300mm

    Resistant Temperature

    Glass:150℃

    Borosilicate:450℃

      UVIR-cut filters, rocoes

    ITEM NO: UVIRCUT+AR-400/730

    Spectral Characteristics

    Tave<2% @ 200-385nm

    Tave>95% @ 430-680nm

    Tave<3% @ 800-950nm

    Physical Characteristics

    Borosilicate: 1.1, 2.0, 3.0mm

    Glass: 1.1mm

    Square: 3*3 - 310*320mm

    Round: Dia3 - 300mm

    Resistant Temperature

    Glass:150℃

    Borosilicate:450℃

     
    Information and Notes

    1. Heat reflection filters are vacuum vapor-deposited with a multilayer dielectric film. The number of coating layers is about 36~48 layers, which can be changed according to customer needs.

    2. Coating by PVD-EBGE (Physical Vapor Deposition-Electron Beam Gun Evaporation) .

    3. The transmittance curves are measurements at 0°of incidence angle. No penetration by coating reflection.

    4. The spectral curve is the measured value of the sample and may vary slightly depending on the manufacturing lot, but conforms to the spectral definition.

    5. Round size "Dia" is an abbreviation for diameter, which represents the diameter of a circle.

    6. The website specifications are for reference only, and shipments are subjected to the specifications confirmed by both parties.

    7. The highest safe temperature refers to the temperature that the substrate can withstand under conditions of non-uniform heating or rapid temperature difference.

    8. B270, D263T, BOROFLOAT33 registered trademarks are owned by SCHOTT AG.

    9. Browse below for more information and products,

       *Refer to Infrared Absorbing Filters - Absorbing Infrared
       *Reference to Glass filters
       *Reference Heat Reflection Filters/Heat Glass
    ircut,rocoes hot mirror,rocoes ir block,rocoes
    pagetop